Borated Polyethylene Neutron Shielding board Radiation barrier

Borated Polyethylene Neutron Shielding, supplied by XINXING, is a lightweight, cost-effective neutron shielding solution to attenuate and absorb neutron radiation. Our borated polyethylene contains 5% (2% available on special order) boron content by weight. Used in the medical, nuclear, and industrial marketplaces borated polyethylene is ideal for medical vaults and doors, particle accelerators, hot cells, nuclear storage and transport containers, and nuclear detection systems.
Most radioactive fields consist of different types of radiation. The most common include fast neutron, thermal neutron, primary gamma rays and secondary gamma rays. XINXING Shield is a borated polyethylene neutron shielding designed to attenuate these types of radiations.

• Fast Neutrons are most effectively shielded by hydrogen. XINXING Shield   has an inherently high concentration of hydrogen, over 13% of volume.

• Thermal Neutrons are shielded by polyethylene with the presence of boron, such as XINXING Shield  Industrial Grade with 5% boron by weight.

• Secondary Gamma Rays are created by the capture of thermal neutrons by hydrogen. These captured gamma rays can be minimized by adding boron, resulting in a significantly reduced energy dosage of only .42 MeV.

Neutron Shielding for Construction Borated Polyethylene 
Mould size :

Neutron Shielding for Construction Borated Polyethylene; 含硼聚乙烯屏蔽体  Size :

2000x1000x(6-300)mm   3050x3050x(6-300)mm

5040x1330x(6-300)mm   4730x1230x(6-300)mm

3050x1220x(6-300)mm   6050x1820x(6-300)mm

3030x1550x(6-300)mm   4520x2000x(6-300)mm

Any size within the standard size is available .

FEATURES & BENEFITS

• Standard sheet size of 48″ x 96″ x 1″ thick (160lbs)

• Standard pellet size is 1/16" to 3/16" and available in 30 lb. bags or bulk

• Durable over a wide temperature range

• Consistent density and homogeneity

• Rated to MIL-P-23536A and EB2562E specifications

• Used as medical and industrial neutron shielding for more than 25 years.

• Light-weight, cost-effective and easily fabricated

• High cross-section for consistent neutron attenuation.

• Specific Gravity is 0.92.

APPLICATIONS

• Airport Security and Sea Port Security

• Medical Vaults

• Nuclear Reactors

• Nuclear Storage

• Nuclear-Powered Vessels & Vehicles

• Research Applications

• Linear Particle Accelerators

• Transport Containers

MATERIAL PROPERTIES

MATERIAL COMPARISON

Also Available:

• High-density polyethylene (HDPE) with minimal impurities

• Neutron moderator with very high hydrogen content

• Available in slabs, cylinders, pellets, and can be easily machined into custom shapes

• Contains 30% boron and relatively high hydrogen content

• Effective neutron shielding for criticality control applications

• Available in slabs, bricks, cylinders, and other custom shapes

Control of criticality is of the utmost importance during all phases of power reactor fuel handling, including reprocessing. In order to assure neutron isolation during these stages, shielding materials containing very high concentrations of boron are frequently used.
Borated Polyethylene 30 consists of polyethylene loaded with 30% natural boron. It contains 2.0 x 1022 boron atoms per cm3 and is typically used in applications such as criticality control where an effective thermal neutron absorber is required. It has a relatively high hydrogen content making it an effective fast neutron shield combined with a very high boron content for thermal neutron attenuation.
Borated Polyethylene 30 is available in slabs, bricks, and cylinders.